Friday, November 19, 2010

Is this guy using video editing to do his card trick?

I know this guy from school, and I've seen him do some pretty cool (but relatively simple) card tricks in person, but I think he might be using video editing in his video to change the color of the deck.



http://www.youtube.com/watch?v=HnF3bNhau



I know he says he doesn't use any video editing, but what do you think?



If he didn't use video editing, how do you think he did it?Is this guy using video editing to do his card trick?
I think it was legitimate, as there can be a few different ways that can be done. I can see how it could have been caused by the bicycle cards friction trick, but that's all I'm going to give away. ;-)Is this guy using video editing to do his card trick?
It looks legit. He probably was switching the cards while he was hiding them with his hand. Classic misdirection illusion. He's good though.
I think it is def legit...



although there is a possibility it was edited I highly doubt it.
This is totally real.



I do not know of any program that could do something like that, and even if I did know of one, I wouldn't have the slightest idea how to change the color of the cards. I can totally see how he did it, but I'm sure there is no video editing involved. =)

How can I change the power supply on my pc?

i got a Gateway DX4720-03 and i need to change the video card ...i was thinkin of nvidia 9800gt but the 512mb one is more expensive than the 1gig :l anyways answer that if u can..to the real question...can i change the power suply on my pc...if so does bestbuy do this?both video card and power suplyHow can I change the power supply on my pc?
You should be able to change ur PSU.



I would not purchase it at bestbuy as they will rip you off (most likely). They would install it for you (The Geeksquad department for a fee) You can always install it yourself. Most of the plugs are self explanitory. If are not experienced with computers, here's a tip, note down every plug you yank out (just write it down each one where you unplug from the mobo, hard drive etc)



Try www.newegg.com



I have purchased this recently and there is 79.99 after a 20 dollar rebate



http://www.newegg.com/Product/Product.asHow can I change the power supply on my pc?
if that card is compatible with your motherboard then all you do is take out the screw holding it on then pull it out of the slot and put the new one in. Its about as easy as you can possible get! and the power supply is about as easy but you have to make sure the main wires to your motherboard are compatible with the connections there, which it should be if the computer is a recent one. Then you unplug the power connections to the motherboard and everything else, unscrew the screws holding the power supply to the frame, slide it out, slide the new one in, put in the screws to hold it on, plug the wires where they are supposed to go, and then it works! Just get a power supply that supplies a little more power so you can plug more stuff in! Its reeeeeally simple!
Checking out your specs these are the upgrades for your model:

(Yes Best Buy or Frys can update your system)



Power Supply 300 W / 400 W / 500 W:

http://shop3.outpost.com/search?search_t



System Memory1 Up to 4 GB of DDR2 667/800 MHz SDRAM (two DIMMs):

http://shop3.frys.com/%7BwbAENuHUbMYuUPV



nvidia 9800gt:

http://www.nvidia.com/object/product_gef



Hard Drive Serial ATA hard disk up to 1 TB1 per 3.5-inch drive:

http://shop3.frys.com/search?cat=-48956%26amp;
You can change the power supply, Yes. I dont know if best buy does this, but maybe geek squad can do it for you.
its just some screws, take them out your self and mount your new one, and make sure to connect everything back
It's a good thing that the 512 is more expensive than 1 GB model!

U can get a powerful graphic card with 1 GB at cheaper price.Forget about the 512 model.



In order to remove the power supply:

-Look at the back of ur casing

-ur old power supply must at the top.(near the power cord)

-u will see some screws which maintain it.

-Use a screw driver to remove the screws.

-Pull the old power supply out.

-put the new one in the same place as the old

-Use the screw driver again.



U can do this process by yourself.No need to be computer literate!



Peace!

Advice on a good graphics card?

I don't play the latest and greatest high-end games. My most demanding simulator (train simulator) recommends a 128MB video card (Geforce 4 equiv.) Direct X 9 or higher.



So basically, I have this motherboard: http://h10025.www1.hp.com/ewfrf/wc/docum



It looks like I'm going to need a PCI Express X16 video card. I'm looking to upgrade my power supply to at least a 500 watt, and possibly a 650 watt ATX soon, which should be enough to power that card? I'm running on a Pentium Dual Core E2140 processor, and RAM (PC2-5300) will also be upgraded to about 3 or 4GB (currently at 2GB). No current crazy upgrades that would zap the power other than when I change the video card.



I need a decent card that is at least 128MB. I really like NVidia...but don't know a lot of recent info about which of their cards are good, and which aren't. I work at a retail store that has a 512MB PNY GeForce 8800GT PCI Express x16 for $100. We're closing down, so the price is dropping somewhat rapidly and will probably be down to $50 or $75 in the next day or two. Before that, it retailed for about $200+. But the question is...just how good is this card? Should I just wait and get that, or order online?Advice on a good graphics card?
PNY is not considered highend nvidia stuff... stick w/ evga or BFG in my opinion but the 8 series should suit you well...Advice on a good graphics card?
OK, well first off, does your case have low profile expansion slots? This is a very important factor. If not, you don't seem like a really serious gamer, so you don't need to blow your money on an 8800GT or the likes. That game/simulator has ridiculously low requirements, so there's no need to go overboard. I would recommend an ATi HD 4670. Its a decently powerful card that can really blow your socks off, for $70. You probably wont need to upgrade your power supply with this card, it uses very low power, and I even use it to play many demanding games, Like COD4, Crysis and the like. A GeForce4 card is from 2002, so any modern video card will suffice.



If you need a low-profile solution, I recommend the ATi 4550 ($50) or NVidia 9400 GT ($50-60). I know you may like nVidia, but they really don't have any cost effective mid-range cards right now. Your best bet is sticking with the ATi 4000 series. They are dirt cheap, and boast great performance, superior to nVidia in all levels.



Oh, and lastly, it really doesn't matter what company manufactured the card too much. They just supply the memory chips, and cooling equipment. I would STRONGLY SUGGEST NOT PURCHASING THE 8800GT!!! It uses too much power for such a little system.



Cheers!



Oh, and PLEASE tell me what case you have. I cant advise you to buy a Power Supply without knowing what your case is. Trust, me, I can help you find whatever you need.



Oh yea, you could probably run all of your simulators on your motherboards integrated graphics, it dishes out 256 megs of memory, so you should be set even with that. the intel 3100 Integrated graphics aint half bad for your purposes, and itll save you alot of money and grief.
Well, if you have a slimeline, then the card won't fit. I see your board is micro ATX, so you must have a small case(unless HP just made a bad decision). Like I said, an 8800GT won't fit in a micro ATX case. I suggest this low profile 9600GT for a slimeline case-

http://www.newegg.com/Product/Product.as

Oh, and the 8800GT is a good card. I have one it and it can run just about every game.
ah i c. The 8800 GT is extremely noisy and heats up very quickly. So are you looking in the $100 range? If that's the case, then ATI would make a better selection as they have lower prices, with a decent quality. But if you were an extreme gamer, you should look towards Geforce GTX 260 ( i love it) No lag at all, running crysis with 40fps!



sorry, i was talking about the 8500 GT i had a year ago.

I've change my resulotion and the screen went black I restarted the pc same How can I get it back?

I was using my video card vga cable connector, I've restarted my pc and the screen stayed black , then I took of my video card connected my vga cable to the motherboard vga connector and it works fine I tunned of the pc plugged in the vha cable to the video card and the screen went black , my questiong is , is there any way I can change the video card resulotion without having it plugged in ?I've change my resulotion and the screen went black I restarted the pc same How can I get it back?
If your computer always restart, There are some reason:

I. It's Hot in There

Sometimes this can be caused by an overheating situation. Itunes, RealPlayer, Windows Media player,etc. require a lot of processing power to decompress and decode music files, which can cause the processor or hard drive to get hot.

Memory Fails Me...

If you determine that overheating is not the problem, the most likely suspect is bad memory.

II. Don't Do Me Any Favors

There's a setting buried in Windows XP that tells your computer to restart when a system error occurs. you turn off that option, you may solve your automatic reboot problem.

1) Click Start, then open Control Panel

2) Click Performance and Maintenance

3) Click System

4) Click on the Advanced Tab

5) Click Settings in the Startup and Recovery section

6) Uncheck Automatically Restart in the System failure section

Note that this may prevent the system from restarting, but it can also mask the true problem.

The most common cause of computer restarting is a corrupt registry.

Most likely your registry is bloated and overstuffed with an assortment of useless pieces of data. The operating system while running your computer has to pick its way through all this excess material. There will be bits of programs which were not completely uninstalled, parts of programs which were never completely installed, fragments of miscellaneous data, useless drivers, and a multitude of other bits and pieces.

The answer is to clean your registry and remove all the material which is not needed.

http://fix-pc-freezing.com/Clean_Up_Cent

Get the best one, and completely clean your windows registry with a few clicks of the mouse.



III. Computer Restarts After Download?



This can also be a virus or spyware problem. I suggest you go through your Control Panel / Add or Remove Programs list and remove any programs you don't need, then run thorough anti-virus and anti-spyware scans. See:

http://fix-pc-freezing.com

How to switch from integrated video to video card?

I think my integrated video on my 4 yr old gateway desktop is going bad. It does have a slot for me to add a video card. If I had the new video card, will the pc start using the new card by itself or do I need to change a setting somewhere? I don't play games and just plan on buying a cheap 2 D video card.How to switch from integrated video to video card?
no just turn off your computer and then put in the new one, turn on your computer and done, your up and running with you new graphics card. but i recommend to buy a new computer because your computer might not be able to handle the new one.How to switch from integrated video to video card?
yes it will as long as you plug the monitor to the new card. you should check the system requirements on the card you want to buy to make sure you meet them, once you install it you can disable the old one by going to control panel, system, hardware properties, device manager, display, right click on the old one, then disable, and that should do it.
yeah your computer should start using the video card you buy, just make sure you install the drivers and plug your monitor into that video card.



You can disable your integrated video card by going to the device manager.
I suggest you start your computer. When your Windows O/S is running, go check out your email, or something for a few minutes. Let the program 'warm up'. (Actually it's the hardware inside, and Windows)

Now close your browser, and go back to just the desktop screen.

Install the CD that comes with the video card. The CD contains the drivers, and other associated software needed. (Best thing to do However, is to consult the Quick Install Instructions that come with the vid card. This takes precedence, over anything I print here!)



Follow the instructions on the cd.

Now close this window when done. If it asks you to restart your computer, or gives this option, DON'T! Click on 'Restart Myself', or 'Restart Later', or whatever. You want to turn the computer off, not restart! Shut the computer down normally. (Start%26gt;Turn Off Computer%26gt;

Shut Down)



When the computer is off, unplug it from the AC source of electricity.

Unplug all cables. (Power, ethernet, monitor, mouse, etc.) Open the computer. (Work on a table) Lay the computer on it's side. (You can lay a towel down to keep from scratching the table, or your computer)



Lay the computer down so that the side that is up, is the open side. ('Natch!) Touch the metal frame of the computer case. This simple procedure, will alleviate your body of static electricity. Your body contains static electricity. Static will burn out your delicate computer hardware components, in a New York minute!

With the computer unplugged you're safe. With you touching the metal frame of the computer case, the computers safe!



Now take the vid card out of it's protective anti-static bag, and install it.

Refrain from using a magnetic-tipped screwdriver. (You'll need a Philips screwdriver)

Making sure that you haven't accidentally jostled any cables loose from the hardware components inside, or that any ram sticks have been jostled loose, close the computer case.



Plug all cables back in. If you simply pulled the power cable out of the back of the computer, STOP! Unplug this cable from the surge protector. Plug it in the back of the computer. Now plug it in the surge protector.

If you do it the other way, there is a chance of a voltage spike!

Sometimes Yes. Sometimes No. Why take a chance?



Make sure you plugged the monitor into the vid card, and not back into the I/O area where it was before! (I/O=Input/Output. This is the area where your mouse, keyboard, etc., plugs into)

Wait one minute, after plugging the power cord back into the power supply, in the computer.

Now turn the computer on.



Sometimes if you install the graphics card,(Video card. Same/same),

BEFORE you install the cd with the drivers, Windows selects a generic driver of it's own. Windows will select a driver that it thinks matches the vid card. This=NO! You will have a conflict!



Windows: ';Hmmm, no drivers? I'll just match this one to it. What the heck! '; ';Wait, a minute! What are these drivers that have been installed now? Which ones do I USE?';



Edit: Doing it this way will force your BIOS program to change the settings for video. From integrated, (Or Onboard), to PCI, or AGP, or PCI-Express. Depends on what kind of graphics expansion slot ,your Gateway model uses.

How to Install A brand new video card into my PC?

ok so I have a Radeon 9250 128mb PCI slot card right now and I'm trying to change to what I think Is a Radeon R9600 256mb card I have drivers for this new card so please tell me down to the last detail how to change my card



the only reason why im trying to change my card in the first place is to make it work with this game called SPORE and I really want to play to nswer me A.S.A.PHow to Install A brand new video card into my PC?
Turn off your computer and unplug all Peripherals.



Move to an uncarpeted area where you have a low chance of getting a static charge.



Press the power button on your computer to discharge any other electricity built up inside your computer. (After you've unplugged it)



Open the case of your computer (can't tell you exactly how since they're all different) and locate your old video card. It will be the card where the blue monitor input slot is on the back.



Unscrew and/or unsnap the old video card from the PCI slot by lifting up on it by the ends. Set aside.



Carefully remove your new video card from the anti-static bag making sure not to touch the gold pins.



Holding it by the top corners, gently but firmly push it down into the PCI slot evenly until it snaps or won't go down anymore. Screw the metal lip back to the computer chassis and replace the cover.



Boot your computer as normal and install your video drivers, then reboot. You should be good to go here!How to Install A brand new video card into my PC?
Open your computer Case

The video card is the think you plug your monitor too.

Remove that Card you see. There might be a slot release you have to hold.

Then Put in your new card.

And you know form here.
First Uninstall The old graphics card driver. Shut down your pc, drain the power. And change the graphics card. Remember!!! ALWAYS UNINSTALL THE OLD GRAPHICS CARD DRIVER

I bought a toshiba satellite and it is suppose to be 256mb video card but it shows 32mb how can i change it?

i bought a toshiba satellite and it is suppose to be 256mb video card but it shows 32mb how can i change it please helpI bought a toshiba satellite and it is suppose to be 256mb video card but it shows 32mb how can i change it?
Hey, When your computer boots up, keep pressing f8, that will take you to your bios, then when your in your bios go to video card, and change it from 32mb to 256mb!