Friday, November 19, 2010

I need help finding cheap Ram for a laptop?

I need to find cheap ram for a laptop

I have a Latitude C360 (old) and i can't change the video card.

So, i heard if you buy more ram you can get the video card memory up.

The memory card is 16mb of memory, and i need 64 - 128mb of memory. Can you tell me how much ram i need, and a cheap price.I need help finding cheap Ram for a laptop?
I did a Google search for your laptop, and couldn't find your model. Make sure it's right first before you go off and buy something that might not work.



You can use the Crucial Memory tool from their website (www.crucial.com) to find what you need, but often the price on what they have in stock is much more than other sources.



Just by buying more RAM though you won't increase the video card's memory. You can allocate more RAM to the video card, which can be a hassle. Since your laptop likely uses DDR ram due to it's age, 1GB of the speed you need could run anywhere from $30 to $70 depending on the specifics of what you need.



It's not really worth it to spend that much upgrading a computer that you likely couldn't sell for that price.I need help finding cheap Ram for a laptop?
crucial.com
i would check at micro center they have all kinds of stuff and answers to all cp problems and they are normally cheaper than anywhere else.
Go to the Crucial website and check there. They have your laptop model and let you know the maximum capacity of memory it can hold. It will also sell you the right model chip for your laptop. Most you'll spend is about 30$
go to newegg.com
I wouldn't buy it from Crucial- too expensive... ram for old systems often costs more than ram for newer models (don't know why). Do this: go to Crucial's website and enter your EXACT model- it will tell you what ram your laptop takes and how much. Then go to ebay- I guarantee you will find it new there for 50% to 75% cheaper than any other online or local store (I recently did this and got 1GB new for $18-including shipping!! would have cost $80 thru crucial, newegg, etc). Good luck
  • rodents
  • I need help finding cheap Ram for a laptop?

    I need to find cheap ram for a laptop

    I have a Latitude C360 (old) and i can't change the video card.

    So, i heard if you buy more ram you can get the video card memory up.

    The memory card is 16mb of memory, and i need 64 - 128mb of memory. Can you tell me how much ram i need, and a cheap price.I need help finding cheap Ram for a laptop?
    I did a Google search for your laptop, and couldn't find your model. Make sure it's right first before you go off and buy something that might not work.



    You can use the Crucial Memory tool from their website (www.crucial.com) to find what you need, but often the price on what they have in stock is much more than other sources.



    Just by buying more RAM though you won't increase the video card's memory. You can allocate more RAM to the video card, which can be a hassle. Since your laptop likely uses DDR ram due to it's age, 1GB of the speed you need could run anywhere from $30 to $70 depending on the specifics of what you need.



    It's not really worth it to spend that much upgrading a computer that you likely couldn't sell for that price.I need help finding cheap Ram for a laptop?
    crucial.com
    i would check at micro center they have all kinds of stuff and answers to all cp problems and they are normally cheaper than anywhere else.
    Go to the Crucial website and check there. They have your laptop model and let you know the maximum capacity of memory it can hold. It will also sell you the right model chip for your laptop. Most you'll spend is about 30$
    go to newegg.com
    I wouldn't buy it from Crucial- too expensive... ram for old systems often costs more than ram for newer models (don't know why). Do this: go to Crucial's website and enter your EXACT model- it will tell you what ram your laptop takes and how much. Then go to ebay- I guarantee you will find it new there for 50% to 75% cheaper than any other online or local store (I recently did this and got 1GB new for $18-including shipping!! would have cost $80 thru crucial, newegg, etc). Good luck

    How do you open a desktop computer system unit?

    I need to change the video card and I'm not sure how to open the system unit so I can get to the internal part to switch the video cards.



    Please help.



    xoxo-EdenHow do you open a desktop computer system unit?
    usually there will be 2 screws you have to take out on the back then pull the side panel back and lift off.



    the screws may be replaced with a lockHow do you open a desktop computer system unit?
    we need to know the model of the computer to help. every computer case is different, therefore they all have different locking mechanisms on the side covers

    How to troubleshoot this PC?

    I changed my busted motherboard for a ASrock 4CoreDual VSTA, then changed my 478 P4 processor for a Pentium D. I have two DDR-333 512MB memory sticks and an NVIDIA 7600gs AGP card. I put everything in place and plug it to a monitor but the screen is just black. No BIOS or anything at all. Tried with a different monitor with the same results. Tested monitor with another PC and it works perfectly. Tried booting with 1 RAM stick or none at all, same results. My case speaker had a broken mole, I used two other different moles to be able to plug them in, but I don't hear any beeps (i hear a couple of pops when I boot). Everything in the case seems to run fine mechanically, all fans spin, DVD-ROM opens. I reset the bios by using jumpers as indicated in the manual, no change. Video card was working on another motherboard right before I changed it (it's almost brand new) I don't believe I damaged any parts with static or anything similar. What else could it be?How to troubleshoot this PC?
    it's really hard to say, based on the info you've given...



    1. it's not your monitor

    2. it's not likely the power supply



    which leaves us with, cpu, graphic's card and RAM...



    the ram that you have is pretty slow, old and it's single channel, this could be your problem...try some other ram, higher speed and ddr2...if I had to guess, I'd say that the RAM is your problem...even so you should be getting beeps from your BIOS to indicate this or some other problem, hence your speaker might be busted or hooked up wrong?



    try to use on board video (if your mobo has it)...



    2x check the jumpers



    check the cpu and fan...are they seated properly?...do you have too much therm...grease?



    clear the CMOS..battery out...wait 5-10min...switch the clear CMOS jumper...battery back...jumper back...try to boot.



    if this doesn't work, repeat but this time download the newest BIOS from the mfg. and flash the bios with a disk or mem-stick after you clear the CMOS.



    to really trouble shoot it, you'll have to break it down to bear-bones...disconnect everything but 1 stick of RAM, video card (if no onboard), cpu and fan...just the basics to get into the BIOS...



    one by one check all of the DIMM's with one stick and then the other, trying to boot from each after each move...



    do you have an, additional power connection for the CPU, 20 or 24 pin main plus another 4,6, or 8 pin right by the cpu for power?How to troubleshoot this PC?
    Can you tell if the MB is getting power (lights)? The first trouble shooting signals come through the PC speaker as beeps so if the motherboard and processor are working and getting hung up at a video card you should be hearing beeps from the little PC speaker. Pops do not sound good. If you are not getting a good setup to the PC speaker just disconnect it to make sure it isn't causing a problem. Can you just get a PC speaker from another case? Try reseating everything and remove any add on cards/drives and see what happens. Go completely bare bones and listen to everything to see if it is all hitting and getting power. If it sounds ok add things one at a time and see how it goes. It sucks when you have to wonder about the PC speaker.

    Changing memeory allocated to video card via BIOS?

    I am running a Geforce 6150 GO in my laptop Apparently I can change the memeory allocated to it via BIOS settings. how do I do thatChanging memeory allocated to video card via BIOS?
    Reboot the box.

    Press %26lt;Del;ete%26gt; or %26lt;Esc%26gt; at the prompt.

    go through the settings.

    You will see it in options or advance options, set the number to the value you want.

    Can the video card be changed on my Dell Inspiron 5100 and if so how do I do it?

    It's a 2003 I think, and for the program I need it to get to work it says the system requirements are: ';ATI Radeon 9800 256MB VRAM or Nvidia 6600 GT with 256MB of VRAM ( Video cards with vertex/pizel shaders 2.x and above are recommended.';



    And also is the sound card I have in the computer (the one that came with the computer) compatible with Direct X 9.0? I can't figure out how to see what sound card is in my computer. Please help!Can the video card be changed on my Dell Inspiron 5100 and if so how do I do it?
    Here is the link as to avail. Vid card upgrades avail. for that unit from Dell



    http://accessories.us.dell.com/sna/categ



    Simply follow the last link to actually install the new card.Can the video card be changed on my Dell Inspiron 5100 and if so how do I do it?
    Usually video cards are on the main board of a laptop, and therefore is very difficult to change it without changing the whole main board.



    Laptops typically have to sacrifice modularity for a more compact design, and so only a limited amount of devices can be replaced/upgraded (ie. hard drive, ram (the ones that aren't soldered onboard), and probably a couple other devices depending on the laptop.



    As for finding out what sound card you have, you can go to your control panel, sounds, then hit the hardware tab. In that tab it should give you some hints to what you have. You can also look up your laptops model online.



    I also haven't ever seen any modern sound card that is not compatible with any DirectX, so I doubt you have to worry about that aspect..
    you can change video card for Dell Inspiron 5100

    please check manufacurer's specifications for other video card compatibility



    if you want to learn how to remove video card, browse

    http://support.dell.com/support/edocs/systems/ins5100/en/sm/palmrest.htm#1105456

    I have a computer video problem: Computer is a 466 MHz Celeron with onboard video card.?

    Computer was working okay when I shut down, but when I rebooted the next day I got no video. I changed monitors, installed a working PCI graphics card, replaced RAM, removed battery (to reset BIOS) . . . but nothing helped. I've lost onboard video in other computers but was able to install a PCI card to get it back. I have some experience with general computer repair but not with mobo problems. I assume my mobo may be bad, but how do I know for sure? And why did it go so fast?I have a computer video problem: Computer is a 466 MHz Celeron with onboard video card.?
    If your computer is not working properly when it is switched on, it could be a problem with device drivers, hardware or software.

    Detailed instructions at http://tinyurl.com/yd34ojI have a computer video problem: Computer is a 466 MHz Celeron with onboard video card.?
    all thats happened is you video drivers have gotten corrupted

    just reinstall them

    its not a big deal
    You can often diagnose any problem at the motherboard level by interpreting the number %26amp; types of beeps the PC generates at bootup.



    Please follow this link for details (and make sure your PC speaker ...the internal one...is connected properly):



    http://www.computerhope.com/beep.htm
    try starting in SAFE mode if the machine will come up in that then try to re-installing the video drivers..if not again try your add in PCI card but goto the bios and tell it to use the card and not the onboard see if that helps......and does it go thru post ?? if not you may just have a bad motherboard
    Its usually visually undetectable when a motherboard goes bad. The only thing you may find to give clues that the board is bad are blown or bluged capactiors. These are the little electrical components that look like tiny soda cans. When they are good and functional the tops will look very flat, but if they are bad, they will be bulged and possibly leaking a fluid out of the top. If you see this anywhere on the board, then it needs to be replaced. But with all you have replaced, I would bet it is bad even if you don't see any bad capactiors. Besides, running a 466MHz celeron indicates that you are due for an upgrade anyway. It may be for the best. Not trying to be personal or rude, but this processor isn't sufficient for most of today's computing needs.
    As Kevin ? Gent said, the first probablility is the drivers may need to be re-installed from your ';system'; disc.



    As to repairing MOBO. MOST are multilayer, and considered NOT repairable except by the manufacturer. (They usually just replace them unless it is a bad chip!; and it takes test equipment to find the bad part.)



    If the MOBO, or system, is still in warranty, contact the manufacturer. (They will want you to return it for repair.)